All fittings must have a firm grip on the pipe, which is a key element for reliable performance. There are many types of fittings and system requirements must be considered when deciding on their tri-clamp fittings use. You can also get tri-clamp fittings at The Sanitary Fittings Co.
Compression mounting, which is the first type of pipe fitting, consists of three components – nuts, body, and sealing rings or sleeves.
This type has a significant loss – the most important is that it can only withstand minimal pressure and processing is very difficult because of the sealing ring design. Screw joints are often used to connect pipes according to plan.
Stainless steel fittings have an elastomer O ring near each end open to close the pipe. First, the pipe is pressed into the fitting: – The O-ring is designed so that it is pressed freely into the pipe.
The permanent seal is then made with the help of a special clamp, which presses three projections onto the fitting and thus permanently damages the ends of the fittings. After pressing the rubber O-ring, the ring is tightly tightened between the pipe and the connection part, which creates a permanent connection without leakage.
Other types of pipe fittings include welding fittings, pipe fittings, and flanges. Although there are many materials suitable for pipe fittings, stainless steel fittings are highly desirable in certain systems and certain environments – for example in marine systems and cleanliness.
If you use fittings from reputable manufacturers and are suitable for systems that need them, you must make use of exceptional durability.